Tiger Jungle Vibe wallpaper
This design is a mural, which means you choose how to crop it to fit your wall.
Price:
CA$5.85 / sq ft
CA$6.97 / sq ft
Minimum order:
CA$63.00
CA$75.00
Measurement
Tiger jungle wallpaper in a soft watercolor style, featuring a striped tiger framed by tropical palm leaves on a muted beige background. Green foliage, warm orange, black and sandy tones give this animal wallpaper a calm yet wild feel. A great choice for anyone searching for tiger wallpaper, jungle wallpaper, tropical animal wall decor or watercolor safari motifs with a natural, artistic look from HappyWall.
Easy to install
Installing the Tiger Jungle Vibe wallpaper is surprisingly simple
Non-woven
The Tiger Jungle Vibe wallpaper is made of non-woven material. Each panel is 19.7 inches (50 cm) wide
Custom wall size
The Tiger Jungle Vibe wallpaper can be customized for your wall. You decide the exact size and how you want to crop it.
Eco-friendly
We print with eco-friendly inks on PVC-free material
Item number: 55435
How to measure your wall
Simply measure the width and height of your entire wall. We produce your wallpaper exactly to your specifications, but we recommend adding 2-4 inches extra to both width and height. Below you'll find tips for different wall types.
Standard walls
Measure the width and height of the entire wall. Double-check your measurements carefully. We produce your wallpaper exactly to your specifications, but recommend adding 2-4 inches extra to both width and height.
Sloped walls
Measure the wall at its highest and widest point. You can ignore any slopes. The wallpaper will be printed as a complete rectangle or square, and the sloped sections are trimmed during installation. Add 2-4 inches extra to the width and height.
Walls with more than one slope
Measure the wall at its widest and tallest points. The wallpaper will be produced as a complete rectangle, and the angled sections are trimmed during installation. Add 2-4 inches extra to the width and height.
Walls with doors, windows or other obstacles
Measure the width and height of the entire wall. You'll trim around doors and windows as you hang the wallpaper. We produce your wallpaper exactly to your specifications, but recommend adding 2-4 inches extra to both width and height.
Multiple walls
Add together the widths of all your walls and include 2-4 inches extra per wall. Then measure the height from the highest point and add 2-4 inches as well. You can order the wallpaper as one continuous piece.
Staircases
Measure the height at the wall's tallest point and the width at its widest point, just as for sloped walls. All sloped sections are trimmed during installation. Add 2-4 inches extra to the width and height.
Hanging instructions for Tiger Jungle Vibe
- The panels are numbered in the order they should be hung
- Hang from left to right
- The panels should be hung edge to edge
Recommended tools
Preparation
1. Make sure the surface is smooth and clean
Remove any old paint or wallpaper that is coming off. Clean the surface and patch any holes or cracks with spackle. If the surface is porous, please apply a primer or wallpaper sizing before you hang the mural. Porous surfaces include freshly skim-coated walls, walls with old wallpaper, particle board, or similar materials. When hanging on dense, non-porous surfaces, the paste may take several days to dry, as the paper is not very breathable. You should also prime the surface if it is a dark or strong colour that could show through the wall mural.2. Mix wallpaper paste (sold separately)
Fill a clean bucket with 4 litres (1 US gallon) of cold water and slowly add the paste powder while stirring briskly. Let the paste stand for 5 minutes, then stir again. The paste is now ready to use. The paste should have a thick consistency, so don't use more than 4 litres (1 US gallon) of water when mixing. If you do add more, the wallpaper may not adhere properly. One bag covers about 20-22 m² (215-235 sq ft). If you would rather not mix your own, use a ready-mixed paste rated for non-woven wallpaper.Hanging
1. Check the wallpaper
Before hanging, make sure no panels are missing and none have any defects or damage. The panels are numbered at the top in the order they should be hung. Hang from left to right.2. Make sure the panels are hung straight
The first panel must be perfectly plumb. Draw a vertical line one panel width (19.7 in / 50 cm) in from the corner using a level, a tape measure, and a pencil. Use that line as a guide for the first panel. Keep the pencil marks faint so they don't show through the wall mural.3. Apply the paste directly to the wall
Use a roller or a brush. It's important to cover the whole area with paste, because an unpasted spot will create a blister in the wall mural. Apply the paste approximately one panel width ahead of where you're working.4. Hang the panels edge to edge
The panels should not overlap. Take care to press the panels together firmly at the seams. A seam roller gives the best results. Be careful to match up the pattern with the next panel, and avoid getting wallpaper paste on the front of the mural as this will show when it dries. Note: Avoid sharp creases as these may cause cracks in the print.5. Smooth down the panels from ceiling to floor
Use your hands or a wallpaper brush, starting from the middle and smoothing out toward the edges. Any small bubbles and wrinkles will disappear once the wall mural has dried. If there are any spots of paste on the front of the wallpaper, use a damp cloth or sponge to remove them, but avoid rubbing.6. Trim off any excess paper
Once all the panels have been hung, trim off any excess paper using a trim guide and a sharp knife.Let it dry
Allow the wallpaper to dry completely, then sit back and enjoy your new room!How to hang Happy Mattic Peel&Stick wallpaper
Recommended tools
Prep your wall
Using a damp cloth or sponge, clean the surface with warm water and mild soap. Allow the walls to dry for a minimum of 24 hours. While cleaning, verify your wall is smooth. Textured surfaces (orange peel, knockdown, or rough finishes) make peel & stick wallpaper difficult to apply. For textured walls, we recommend our traditional paste-the-wall wallpaper instead. If you have freshly painted walls, wait 4-6 weeks before application to allow the paint to fully cure. If your wall is a dark colour, paint it a light, even shade first so it won't show through the wallpaper.Prepare the wallpaper panels
Lay all panels flat to remove any curl from the roll. Allow them to rest for at least 24 hours in the room where they will be installed so they can acclimate to the temperature and humidity.Step 1: Check and organize your panels
Unroll the panels and cut them apart along the cut marks. Lay them flat with the label facing up, arranged in numerical order starting with panel 1. Verify you have all panels and check for any defects or damage.Step 2: Ensure the first panel is straight
The first panel must be perfectly vertical. Make a light pencil mark one panel width (19.7 in / 50 cm) from your starting corner near the ceiling. Use a plumb line or level to draw a vertical line down the wall. Align your first panel with this line.Step 3: Apply the wallpaper
Peel the backing paper off slowly, about one-third at a time. Smooth the wallpaper onto the wall with your hands as you go. Work from the middle outward to prevent air bubbles.Step 4: Join panels edge to edge
Position panels edge to edge without overlapping. If a panel isn't perfectly positioned, carefully peel it back and reposition it. The repositionable adhesive allows for adjustments.Step 5: Remove air bubbles
Once your panels are on the wall, use the soft squeegee to smooth out any air bubbles between the wallpaper and wall. Work from the centre outward with firm, even strokes to ensure proper adhesion.Step 6: Trim excess
After all panels are hung, use a sharp blade to trim excess wallpaper along the ceiling and floor. A sharp blade prevents tearing.Enjoy your new space!
Step back and admire your transformed room.
Free shipping with UPS
3-10 business days.
We ship all over the world.
Once you place your order, we usually print it the next business day. All products are made in and shipped from Sweden. Once shipped, UPS will send you an email with tracking details.
- Delivery to Canada: 3-10 business days
All our wall murals are printed with Happy Mattic™, our soft and non-reflective matte finish. The material gives your walls a high-end look and a luxurious feel.
-
Paste applied to the wall
-
Does not fade in sunlight
-
PVC-free and eco-friendly
-
Fire rated
-
Washable
-
Matte finish
Happy Mattic Peel&Stick™ is our self-adhesive wallpaper. It has the same high-end look and feel as our traditional paper, but it's far easier to hang.
-
Self-adhesive
-
Easy to install and remove, DIY friendly
-
Best for smooth walls
-
Does not fade in sunlight
-
PVC-free and eco-friendly
-
Washable
-
Matte finish
